MICRON 350

antifoulings
International antifoulings

"PREMIUM" ANTIFOULING - SELF POLISHING WITH MULTI-SEASONAL PERFORMANCE

Micron 350 is an antifouling product effective against fouling organisms; slime, aquatic plants and animals. A Premium Self Polishing Copolymer (SPC) antifouling suitable for professional and consumer application onto vessels in fresh and salt water.
The continuously polishing system provides up to 2 years performance, avoiding paint build up.
The eversmoothing surface ensures that drag is always minimised whilst maintaining optimum biocide release including in stationary periods.

◌ colour before application
● colour after submersion

Although every effort has been made to ensure the colours on screen are as close as possible to actual paint colours, we cannot guarantee an exact colour match. Paint swatch colours will vary depending on your screen settings and resolution. The manufacturer and the reseller cannot be responsible for slight variations.

HOW AND WHEN TO USE MICRON 350

Compatibility	GRP, wood, steel/iron, lead. Not suitable for use on aluminium, light alloys and galvanised surfaces.
Application	Spray, brush and roller brush
Number of coatings	2 coats on hull and three on the waterline, rudder and keel. For a 2 seasons protection, apply 3 coats and a fourth one on the leading and trailing edges, waterline, rudder and keel.
Pratical coverage	9 m²/lt with brush and paint roller, 3 m²/lt with spray
Launch	Possibility to apply this product and launch the boat from 24 hours (5°C) to 12 months.
HULL'S MATERIAL	TREATMENT
Bare Grp	Prime with Gelshield 200 for osmosis protection or PRIMOCON
Steel/lead/iron/wood	Use INTERPROTECT or PRIMOCON primer.
EXISTING ANTIFOULING	TREATMENT
In good conditions	Wash with water and leave it dry. With unkown and incompatible antifouling, use PRIMOCON.
In bad conditions	Remove the antifouling with INTERSTRIP.